Question Please show all the views and please dimension all the parts Draw the necessary views, with a HALF SECTION VIEW for stock guide shown in Figure Q1. ALL DIMENSIONS ARE IN MILLIMETRES. USE A DRAWING SCALE OF 1:1 -2x 9 T9 -146 $127 073-7 R6- -243 FILLETS R3 053.95-53.98 125- METRIC Figure Q1

Shown in the figure below is a system that executes a power cycle while receiving Q1 = 600 Btu by heat transfer at a temperature of T1 = 1500°R and discharging Q2 = 400 Btu by heat transfer at a temperature of T2 = 800°R. A third heat transfer occurs at a temperature of T3 = 600°R. These are the only heat transfers experienced by the system.(a) Applying an energy balance together with Eq. 5.13, determine the minimum and maximum values for Q3, in Btu, for the heat transfer at T3 = 600°R.(b) For the power cycle, evaluate the maximum theoretical thermal efficiency. ►WeyckcycleT2T3Q2

Solve in C language ( using if else) Q1. The Students' Corner Store in a university needs a program to implement its students' discount policy. The program is to prompt the user to enter the purchase total and to indicate whether the purchaser is a student. Students are eligible to receive a 20% discount on all their purchases. The discount calculation, however, must be done before addition of the 5% sales tax. This is done to ensure that the discount is not applied to the sales tax. Here are two sample output files - one for a student purchaser and one for a nonstudent purchaser. Total purchases: $ 122.00 Student's discount (20%:: 24.40 Discounted total: 97.60 Sales tax (5%): $ 102.48 Total purchases: $ 24.90 Sales Tax (5%): 1.25 Total: $ 26.15

THANKS A MELON FOR MAKING MY BIRTHDAY SPECIAL! 1. A concrete column 4.30 m high with a cross-sectional dimension of 20 cm x 25 cm is resting on a concrete footing 30 cm thick x 80 cm square. If class "B" concrete is specified, find the quantity of cement, sand, gravel, and water if there are 12 columns of the same size. Use 40 kg / bag cement. Water-cement ratio is 50%. 2. Prepare bill of materials for the masonry works using CHB. Use 40 kg/bag cement - class "B" for concrete and class "C" for mortar and plastering. Take note that only the outer part of the wall will be plastered. 0.35 m. 0.70 m. 1.00 m. 0.50 m. W-2 1.20 m. 3.00 m. 1.20 m. 0.70 m. B В A 2.70 m. 2.10 m. Ground Line 0.60 m. 0.60 m. 3.50 m. -6.00 m. Footing Line

Shown in the figure below is a capacitor. Each plate has an area of A = 1.4e-02 m2 and has a gap d = 6.6e-04 meters. Att filled with a dielectric of constant K = 3.87. The thickness of the dielectric layer is a = 2.64e-04 meters leaving a free space Empty Capacitor Partly Filled Capacitor Area = A dielectric constant K d Write the FORMULA for the capacitance of the empty capacitor. 1 Determine the capacitance of the empty capacitor Cempty = Farads When you partly fill the capacitor, which of these best describes the new configuration: Parallel Series Both series and parallel Neither series nor parallel e-02 m2 and has a gap d = 6.62-04 meters. At the first moment, the capacitor is empty. At the second moment is it partly ayer is a = 2.64e-04 meters leaving a free space of b = 3.96e-04 meters. dielectric constant Farads - configuration: Determine the formula for the partly filled capacitor Chilled = Determine the value of the partly filled capacitor Chilled = Farads NOTE: Decide whether the partly filled capacitor acts like parallel or series by following the charge: . If the charge splits between the caps, parallel. • If the charge is the same on both caps, series, • The formula for the filled capacitor should use only the distances a and b (NOT d).

< 1 of 1 Figure 120 грm 2.0 m The 300 g bar is rotating as shown in (Figure 1). Part A What is the magnitude of the angular momentum of the bar? ? kg m² /s Submit Request Answer Part B What is the direction of the angular momentum of the bar? O into the page O out of the page

v MI 7. Let (r) = for r e A := (0,0) (i) Find the pointwise limit f off (ii) Show that each f, is bounded on A but the pointwise limit f of the sequence is not bounded on A. (ii) Decide whether or not the convergence in () is uniform, prove your claim. (iv) use the e-strip to prove your claim in (iii).